0086 519 85962300 canty@hot-knife.cn
- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
 |
| Quantity: | |
|---|---|
SP0402
Canty
3010400002
Features:
Suitable for commercial artwork development, complex and small font design in advertisement (such as letters) and art piece creation.
Lithium battery design(no cumbersome cable) is more free and convenient.
3 tools in 1: cut or engrave foam complete tool set.
Easily cuts, shapes and sculpts styrofoam smooth and fast.
Heat up quickly, seals edges clean and leaves no debris.
Desktop holder makes precise cuts, adjusts for angle cuts and vertical cuts;
You can cut the foam board or foam block from any angle and craft into your desired shape.
The fully charged battery can support 45 minutes of continuous use.
Technical Data:
| Working Voltage | DC 8 V 2000 mAh |
| Replacement Wire for Bow | 10 m |
| Long Cutting Tip | 120 mm |
| Length of Wire for Bow | 130 mm |
| Diameter of Replacement Wire for Bow | Φ 0.28 |
| Max. Temperature of Engraver Tip | 400 ℃ |
| Working Time | 45-60 min |
| Charging Time | 75 min |
| Net Weight | 305 g |
| Charging Voltage | 5 V |
Basic Kit:
Cutting Handle*1, Long Cutting Tip*1, Hot Wire Tip*1, 10 m Replacement Wire for Bow*1, Engraver Tip*1, Desktop Holder*1, TYPE-C Charging Cable*1, Black Marker Pen*1, Instruction*1
Features:
Suitable for commercial artwork development, complex and small font design in advertisement (such as letters) and art piece creation.
Lithium battery design(no cumbersome cable) is more free and convenient.
3 tools in 1: cut or engrave foam complete tool set.
Easily cuts, shapes and sculpts styrofoam smooth and fast.
Heat up quickly, seals edges clean and leaves no debris.
Desktop holder makes precise cuts, adjusts for angle cuts and vertical cuts;
You can cut the foam board or foam block from any angle and craft into your desired shape.
The fully charged battery can support 45 minutes of continuous use.
Technical Data:
| Working Voltage | DC 8 V 2000 mAh |
| Replacement Wire for Bow | 10 m |
| Long Cutting Tip | 120 mm |
| Length of Wire for Bow | 130 mm |
| Diameter of Replacement Wire for Bow | Φ 0.28 |
| Max. Temperature of Engraver Tip | 400 ℃ |
| Working Time | 45-60 min |
| Charging Time | 75 min |
| Net Weight | 305 g |
| Charging Voltage | 5 V |
Basic Kit:
Cutting Handle*1, Long Cutting Tip*1, Hot Wire Tip*1, 10 m Replacement Wire for Bow*1, Engraver Tip*1, Desktop Holder*1, TYPE-C Charging Cable*1, Black Marker Pen*1, Instruction*1
