 |
| Quantity: | |
|---|---|
KD-7D
MINOVA
Application
· MINOVA KD-7D foam cutter suitable for cutting expanded polystyrene (EPS) and extruded polystyrene (XPS), KT board, EPE foam, etc.
· 18V/4.0Ah Li-battery is power enough for cutting EPS /XPS without the limited of workplace.
· Rotatable design, Suitable for various usage scenarios and different usage habits.
· Three-speed power adjustment: low, middle and high.
· Matched with different kinds of blades.
· Powered by 18V battery and can be used with most brands of batteries via a battery adapter.
Optional Accessories And Blades
Blind Holes Slider |
E-Box Cutter |
 Compatible with the Adaptor |
Sled and Guide Gauge |
Extension for Hot Knife: L(1230mm) / W(50mm) | |
| Technical Data | |
| Product Model | KD-7D |
Battery | 18V/4.0Ah |
| Charge | 100-240V AC / 50-60Hz |
| Charging Time | 110 mins |
N.W. | 570g (without Battery) |
Max. Temperature | 500°C |
Max. Cutting Depth | 200mm |
Adjusting Knob | 3 Steps |
Application
· MINOVA KD-7D foam cutter suitable for cutting expanded polystyrene (EPS) and extruded polystyrene (XPS), KT board, EPE foam, etc.
· 18V/4.0Ah Li-battery is power enough for cutting EPS /XPS without the limited of workplace.
· Rotatable design, Suitable for various usage scenarios and different usage habits.
· Three-speed power adjustment: low, middle and high.
· Matched with different kinds of blades.
· Powered by 18V battery and can be used with most brands of batteries via a battery adapter.
Optional Accessories And Blades
Blind Holes Slider |
E-Box Cutter |
Compatible with the Adaptor |
Sled and Guide Gauge |
Extension for Hot Knife: L(1230mm) / W(50mm) | |
| Technical Data | |
| Product Model | KD-7D |
Battery | 18V/4.0Ah |
| Charge | 100-240V AC / 50-60Hz |
| Charging Time | 110 mins |
N.W. | 570g (without Battery) |
Max. Temperature | 500°C |
Max. Cutting Depth | 200mm |
Adjusting Knob | 3 Steps |
