KD-7X Hot Knife a real professional-grade hot cutting tool for foamed plastics. The KD-7X Hot Knife heats up in seconds and gives the operator temperature control. Never before has working with foamed plastics been this easy, inexpensive and free of mess.
· KD-7X is Continuously Operated Hand-Hold Hot Knife with Air-cooling System,
mainly for cutting EPS/XPS foam board.
· The temperature can reach up to 500℃ in Seconds.
· KD-7X is 2 Times Faster than all of existing hot knife for cut EPS foam board.
· You can do easy and effortless cutting by adjusting the temperature knob.
|Input Voltage：||AC 230 V 50 Hz|
|Output power：||Max.320 W|
|Max.Cutting Depth：||250 mm (Standard Kit)|
|Power Cord Length:||3.0 m|
|Adjusting Knob:||16 steps|
|Continuous Operation |
24 Hours Continuously Operation, Not intermittent
(Air-cooling Hot Knife with 20cm blade for cutting EPS/XPS)
EPS foam board
XPS foam board
KD-7X Main body, 250mm Blade, Spanner, Brush, Plastic box packing.
|No.1.2.100 100mm ||No.1.2.150 150mm ||No.1.2.200 200mm|
|No.1.2.250 250mm ||12” Flat Blade No.9.2|
|Adaptor No.5.2 ||Groover Blade |
No.G20 G27 G34
|Sled(20-160mm)No.5.1 ||Sculpture Blade Holder No.5.21 ||Cutting Guider No.5.3|